Since I love to personalize everything around me, here is a way to create a unique door hanger for your bedroom entrance!



Here’s what you will need :



What you need to do:

1. Measure and cut your cardboard ( 5 x 7 inches) for the background.

2. Using patterned paper from the Paris Hilton My New BFF scrapbooking theme kit, cut into the same size as your cardboard and adhere with glue stick.

3. Make 2 hole punches along the top edge, both equal distance from the sides.

4. Take your photo and mat over the BFF pink sticker and adhere both to the center of the front side of the door hanger.

5. Place the BFF purple rhinestone letters along the left side of the photo.

6. Using the decorative heart rhinestone sheet, cut 3 hearts and place on the right side of your photo.

7. Then place the pink glitter B and F heart 3-D stickers over the rhinestone hearts for a layering effect.

8. Add the "Hanging Out" 3-D sticker above your photo.

9. To make the dangling heart, cut a heart about 2 1/2 inches in diameter out of cardboard and cover with patterned paper.

10. Using the paper piercer, pierce a tiny hole in the door hanger at the bottom edge under the rhinestone hearts and another hole in the top left edge of your dangling heart.

11. Take an o-ring (or wire) and pass it through the door hanger and dangling heart.

12. Using tiny pliers, close the ring tightly or twist your wire together (You can add a dangling charm for more sparkle!).

13. On the dangling heart, place the 3-D BFF pink glitter sticker.

14. Take the ribbon(s) and thread through the top holes.

15. Tie a knot behind each hole on the back.

16. You can also glue lace or trims to the bottom edge, like I did with a pom pom trim!

17. For a final touch, take some ribbon and make a tiny bow and glue gun it to the bottom center under your photo.

My Creativity Collection is available online - in the purchase section at: http://pariscreativity.com/

 





Love Paris xoxo