Oak Clay Pin
Jewelry & Gifts by Martha Reed |
Supplies
 - Medium and Large Aspen Leaf Stamps (The Moon Rose Art Stamps)
- Craft Knife
- Premo Clay Gold and Copper (Polyform Products)
- Liquid Sculpey (Polyform Products)
- Roxs-Copper, Dollar Gold, Quicksilver (JudiKins)
- Perfect Copper, Kiwi, Rust, Interference Green Perfect Pearls (Ranger)
- Toaster Oven (Artist’s Own)
- Jet Black StazOn ink pad (Tsukineko)
- Pasta Machine (Atlas)
- Scissors (Acme)
- Sculpey Glaze (Polyform Products)
|
Instructions
1. Condition both colors of Premo! clay using Pasta Machine on largest setting, into approximately 1/4 of an inch stripes.
2. Stamp Large Aspen Leaf on Scrap Paper, Cut Out and use as a guide for cutting out shape from Copper Clay.
3. Stamp Medium Aspen Leaf on Scrap Paper, Cut Out and use as a guide for cutting out shape from Gold Clay.
4. Coat larger copper clay piece with a thin layer of Liquid Sculpey and firmly place smaller gold piece on top.
5. Sprinkle Roxs into layer of liquid Sculpey as desired.
6. Brush Perfect Pearl onto top layer until desired look is achieved.
7. Bake clay in toaster oven as directed.
8. Allow clay to cool after baking.
9. Ink Small Leaf image with Jet Black StazOn and stamp onto top layer.
10. Allow Ink to dry and brush on Sculpey Glaze over entire piece and allow it to dry.
11. Apply large pin back to pin with E6000.
|
| |
Note: All of the images on
scrapbooking.com can be clicked on and one of two things will
happen. Either a detailed page about the layout will be displayed or a
more detailed version of the picture will appear |
|
Printable Project Card